No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - VXLAN

CloudEngine 12800 and 12800E V200R003C00

This document describes the configurations of VXLAN.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring VXLAN on an IPv6 Network

Configuring VXLAN on an IPv6 Network

If the underlay network is an IPv6 network, you can perform the following VXLAN configuration:

  • Only the CE12800E supports the IPv6 VXLAN Layer 3 gateway, and the CE12800 only supports the IPv6 VXLAN Layer 2 gateway.

  • On the CE12800, only the CE-L48XS-FG, CE-L36CQ-FG, CE-L48XS-FD1, CE-L08CF-FG1, and CE-L16CQ-FD cards support the IPv6 VXLAN function, and the other cards do not support this function.

  • An IPv6 VXLAN tunnel can be deployed only in static mode.

  • Only the IPv6 VXLAN centralized gateway can be deployed, and distributed gateways cannot be deployed.

Updated: 2019-05-05

Document ID: EDOC1100004207

Views: 30804

Downloads: 66

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next