No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VXLAN

CloudEngine 12800 and 12800E V200R003C00

This document describes the configurations of VXLAN.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring VXLAN ECMP Fast Convergence

(Optional) Configuring VXLAN ECMP Fast Convergence

Context

You can configure the enhanced VXLAN ECMP convergence mode on a VXLAN network that has high requirements on traffic switching performance upon an ECMP link failure. This configuration improves traffic switching performance upon an ECMP link failure.

NOTE:
  • The CE12800E does not support this function.

  • After the enhanced VXLAN ECMP convergence mode is configured, traffic is interrupted. Therefore, you are advised to configure this mode when the traffic volume is low or no traffic is forwarded.

  • After the enhanced VXLAN ECMP convergence mode is configured, some ECMP resources are occupied, and some configured services may not use resources properly.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run vxlan ecmp convergence enhanced

    The enhanced VXLAN ECMP convergence mode is configured.

    By default, the enhanced VXLAN ECMP convergence mode is not configured.

    NOTE:

    This command takes effect immediately and you do not need to restart the switch. You can modify the configuration at an interval greater than 300 seconds.

  3. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-05-05

Document ID: EDOC1100004207

Views: 25153

Downloads: 65

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next