No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VXLAN

CloudEngine 12800 and 12800E V200R003C00

This document describes the configurations of VXLAN.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Optimizing Load Balancing on the VXLAN Network

(Optional) Optimizing Load Balancing on the VXLAN Network

Context

On a VXLAN network, VXLAN packets can be load balanced through ECMP or Eth-Trunks. To enable load balancing or improve the load balancing effect, perform either of the following operations:
  • Enable load balancing of VXLAN packets through ECMP in optimized mode.
  • Enable an Eth-Trunk to load balance VXLAN packets in optimized mode.
NOTE:

CE12800E does not support the function.

This function is not supported if the card works in non-enhanced mode. Run the display forward capability command to check the working mode of the card.

Procedure

  1. Enable load balancing of VXLAN packets through ECMP in optimized mode.

    1. Run system-view

      The system view is displayed.

    2. Run assign forward nvo3 ecmp hash enable

      Load balancing of VXLAN packets through ECMP in optimized mode is enabled.

      By default, load balancing of VXLAN packets through ECMP in optimized mode is disabled.

    3. Run commit

      The configuration is committed.

  2. Enable an Eth-Trunk to load balance VXLAN packets in optimized mode.

    1. Run system-view

      The system view is displayed.

    2. Run assign forward nvo3 eth-trunk hash enable

      An Eth-Trunk is enabled to load balance VXLAN packets in optimized mode.

      By default, an Eth-Trunk is disabled from load balancing VXLAN packets in optimized mode.

    3. Run commit

      The configuration is committed.

Translation
Download
Updated: 2019-05-05

Document ID: EDOC1100004207

Views: 31046

Downloads: 66

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next