No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VXLAN

CloudEngine 12800 and 12800E V200R003C00

This document describes the configurations of VXLAN.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the VXLAN Tunnel Mode and Enabling the VXLAN ACL Extension Function

Configuring the VXLAN Tunnel Mode and Enabling the VXLAN ACL Extension Function

Context

  • Configuring a tunnel mode: You need to set the tunnel mode to VXLAN when configuring the VXLAN feature; otherwise, the configurations do not take effect.

  • Enabling the VXLAN ACL extension function: By default, the VXLAN ACL extension function is disabled on the device. If you configure other ACL resource-consuming services, such as MQC, simplified ACL, traffic policing, and BD traffic statistics collection, on the device deployed with VXLAN services, there is a high probability that the other services fail to be configured. You can enable the VXLAN ACL extension function to lower the probability of configuration failure.

To ensure normal forwarding of VXLAN packets, the VXLAN tunnel mode must have been configured and the VXLAN ACL extension function must have been enabled on Layer 2 and Layer 3 VXLAN gateways.

NOTE:

You cannot configure the VXLAN tunnel mode and enable the VXLAN ACL extension function on the CE12800E.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run ip tunnel mode vxlan

    The tunnel mode is set to VXLAN.

    By default, the tunnel mode is VXLAN.

  3. Run assign forward nvo3 acl extend enable

    The VXLAN ACL extension function is enabled.

    By default, the VXLAN ACL extension function is disabled.

  4. Run commit

    The configuration is committed.

Follow-up Procedure

After configuring the VXLAN tunnel mode and enabling the VXLAN ACL extension function, save the configuration and restart the switch to make the configuration take effect.

Translation
Download
Updated: 2019-05-05

Document ID: EDOC1100004207

Views: 30790

Downloads: 66

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next