No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - VXLAN

CloudEngine 12800 and 12800E V200R003C00

This document describes the configurations of VXLAN.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring the VXLAN Operating Status

Monitoring the VXLAN Operating Status


During VXLAN operating status monitoring, you can check causes for fault locating if a VXLAN tunnel goes Down or fails to be dynamically created.


  • Run the display vxlan troubleshooting command to check causes for the VXLAN tunnel Down events and dynamic VXLAN tunnel establishment failures.

    This command can display causes for the recent five VXLAN tunnel Down events and dynamic VXLAN tunnel establishment failures at most.

Updated: 2019-05-05

Document ID: EDOC1100004207

Views: 25464

Downloads: 65

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next