No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - DCN and Server Management

CloudEngine 8800, 7800, 6800, and 5800 V200R003C00

This document describes the configurations of Trill, FCoE, DCB, and NLB Server Cluster Association.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing DCB Statistics

Clearing DCB Statistics

Context

When diagnosing and locating Data Center Bridging (DCB) faults, collect DCB statistics on interfaces in a specified period. Before re-collecting DCB statistics on all interfaces or a specified interface, clear existing DCB statistics.

After the following reset commands are executed, DCB statistics on interfaces are cleared and cannot be restored. Confirm your action before you use these commands.

Procedure

  • Run the reset dcb pfc [ interface interface-type interface-number ] command in the user view to clear Priority-based Flow Control (PFC) statistics on an interface.
  • Run the reset dcb fail-record [ interface interface-type interface-number ] command in the user view to clear DCB negotiation failure records on an interface.
Translation
Download
Updated: 2019-05-08

Document ID: EDOC1100004349

Views: 30211

Downloads: 120

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next