No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - DCN and Server Management

CloudEngine 8800, 7800, 6800, and 5800 V200R003C00

This document describes the configurations of Trill, FCoE, DCB, and NLB Server Cluster Association.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application of TRILL in Data Centers

Application of TRILL in Data Centers

Service Overview

Figure 1-23 shows the data center network of an enterprise.
Figure 1-23 Typical networking of a data center
TRILL is used to build a flat Layer 2 network, which implements unblocked forwarding and smooth VM migration on the entire network. When deploying a data center networking using TRILL, configure basic TRILL functions on all devices and perform the following operations at different network layers:
  • Access layer: Configure a CE VLAN on the user side to connect to the server so that user traffic is transmitted through the TRILL network. If the server is dual-homed to the TRILL network through the access device, on the edge RB connected to the access device to prevent loops. On the network side, you can adjust TRILL route selection and adjust the TRILL network convergence speed to ensure efficient forwarding.
  • Core layer: On the network side, you can adjust TRILL route selection and adjust the TRILL network convergence speed to ensure efficient forwarding. On the egress side, you can connect to other enterprise networks through the egress router, or configure virtual systems (VSs) on the devices at the core layer and use one VS as the egress gateway to connect to other enterprise networks.
Translation
Download
Updated: 2019-05-08

Document ID: EDOC1100004349

Views: 30181

Downloads: 120

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next