No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - DCN and Server Management

CloudEngine 8800, 7800, 6800, and 5800 V200R003C00

This document describes the configurations of Trill, FCoE, DCB, and NLB Server Cluster Association.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
FCF Networking

FCF Networking

On a converged data center network, FCoE is used to implement network convergence. As shown in Figure 2-20, FCFA functions as an access switch and needs to forward LAN, SAN, and Inter-Process Communication (IPC) traffic. To ensure link reliability between ServerA and Array, two links are deployed: ServerA-FCFA-Array and ServerA-FCFB-Array.

Figure 2-20 Typical FCF networking

As shown in Figure 2-21 and Figure 2-22, the FCF uses FC interfaces to connect to the storage device and server.


Only CE8860EIand CE6850U-HI support FC interfaces.

Figure 2-21 Typical FCF networking (FC interface and FCoE interface)
Figure 2-22 Typical FCF networking (FC interface)
Updated: 2019-05-08

Document ID: EDOC1100004349

Views: 30124

Downloads: 120

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next