No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - DCN and Server Management

CloudEngine 8800, 7800, 6800, and 5800 V200R003C00

This document describes the configurations of Trill, FCoE, DCB, and NLB Server Cluster Association.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the FIP Snooping Configuration

Verifying the FIP Snooping Configuration


The configurations of Fibre channel Initialization Protocol (FIP) snooping are complete.


  • Run the display fcoe vlan [ vlan-id ] command to check the FCoE VLAN configuration and the FCoE port roles.
  • Run the display current-configuration | include fcoe command to check whether FCoE link synchronization is enabled and whether protocol packet isolation is enabled.
  • Run the display current-configuration configuration fcoe command to check information about FSB instances.
Updated: 2019-05-08

Document ID: EDOC1100004349

Views: 32359

Downloads: 120

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next