No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - DCN and Server Management

CloudEngine 8800, 7800, 6800, and 5800 V200R003C00

This document describes the configurations of Trill, FCoE, DCB, and NLB Server Cluster Association.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Displaying Statistics on FC and FIP Packets

Displaying Statistics on FC and FIP Packets

Context

After the Fibre Channel over Ethernet (FCoE) configuration is complete, run the following commands in any view to check statistics on Fibre Channel (FC) and Fibre channel Initialization Protocol (FIP) packets.

Procedure

  • Run the display fcoe fc statistics { interface { fcoe-port fcoe-port-id | fc fc-port-id } | brief } command to view statistics on FC packets on a specified interface or all interfaces of FCF or NPort Virtualization (NPV) instances.
  • Run the display fcoe virtual-link statistics { interface { fcoe-port fcoe-port-id | fc fc-port-id } | brief } command to view statistics on FIP packets on a specified interface or all interfaces of FCF or NPV instances.
Translation
Download
Updated: 2019-05-08

Document ID: EDOC1100004349

Views: 30278

Downloads: 120

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next