No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Ethernet Switching

CloudEngine 8800, 7800, 6800, and 5800 V200R003C00

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, MUX VLAN, Voice VLAN, VLAN mapping, QinQ, GVRP, VCMP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, and Layer 2 protocol transparent transmission.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for Layer 2 Protocol Tunneling

Licensing Requirements and Limitations for Layer 2 Protocol Tunneling

Involved Network Elements

Other network elements are not required.

License Requirements

Layer 2 protocol tunneling is a basic feature of a switch and is not under license control.

Version Requirements

Table 14-2 Products and minimum version supporting Layer 2 protocol tunneling

Product

Minimum Version Required

CE8860EI

V100R006C00

CE8861EI/CE8868EI

V200R005C10

CE8850-32CQ-EI

V200R002C50

CE8850-64CQ-EI

V200R005C00

CE7850EI

V100R003C00

CE7855EI

V200R001C00

CE6810EI

V100R003C00

CE6810-48S4Q-LI/CE6810-48S-LI

V100R003C10

CE6810-32T16S4Q-LI/CE6810-24S2Q-LI

V100R005C10

CE6850EI

V100R002C00

CE6850-48S6Q-HI

V100R005C00

CE6850-48T6Q-HI/CE6850U-HI/CE6851HI

V100R005C10

CE6855HI

V200R001C00

CE6856HI

V200R002C50

CE6857EI

V200R005C10

CE6860EI

V200R002C50

CE6865EI

V200R005C00

CE6870-24S6CQ-EI/CE6870-48S6CQ-EI

V200R001C00

CE6870-48T6CQ-EI

V200R002C50

CE6875-48S4CQ-EI

V200R003C00

CE5810EI

V100R002C00

CE5850EI

V100R002C00

CE5850HI

V100R003C00

CE5855EI

V100R005C10

Feature Limitations

  • The CE6850HI, CE6851HI, CE6850U-HI, CE5810EI, CE5850HI, CE5855EI and CE6810LI transparently transmit a maximum of 256 Layer 2 protocol packets per second, and other models transparently transmit a maximum of 512 Layer 2 protocol packets per second. Excess packets are discarded.
  • Do not replace the destination MAC addresses of STP, GVRP, and GMRP packets with the same multicast MAC address.
  • Do not replace the destination MAC addresses of EOAM3ah, LACP, and DLDP packets with the same multicast MAC address.
  • When configuring Layer 2 protocol tunneling, do not use the following multicast MAC addresses to replace the destination MAC address of Layer 2 protocol packets:

    • Destination MAC addresses of BPDUs: 0180-C200-0000 to 0180-C200-002F
    • Destination MAC address of Smart Link packets: 010F-E200-0004
    • Special multicast MAC addresses: 0100-0CCC-CCCC and 0100-0CCC-CCCD
    • Common multicast MAC addresses that have been used on the device
Translation
Download
Updated: 2019-05-08

Document ID: EDOC1100004351

Views: 128541

Downloads: 296

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next