No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Ethernet Switching

CloudEngine 8800, 7800, 6800, and 5800 V200R003C00

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, MUX VLAN, Voice VLAN, VLAN mapping, QinQ, GVRP, VCMP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, and Layer 2 protocol transparent transmission.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration of Basic VBST Functions

Verifying the Configuration of Basic VBST Functions


  • Run the display stp vlan [ vlan-id ] information [ brief | global ] command to check the status of, statistics on, and global brief information about the spanning tree.
  • Run the display stp vlan [ vlan-id ] bridge { root | local } command to check the spanning tree status of the local bridge and root bridge.
  • Run the display stp vlan instance command to check the mapping between instances and VLANs.
Updated: 2019-05-08

Document ID: EDOC1100004351

Views: 159811

Downloads: 326

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next