No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Ethernet Switching

CloudEngine 8800, 7800, 6800, and 5800 V200R003C00

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, MUX VLAN, Voice VLAN, VLAN mapping, QinQ, GVRP, VCMP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, and Layer 2 protocol transparent transmission.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring TC Notification in MSTP Multi-process

Configuring TC Notification in MSTP Multi-process

Context

After the TC notification function is configured for MSTP multi-process, an MSTP process can notify the MSTIs in other specified MSTP processes to update MAC address entries and ARP entries after receiving a TC-BPDU. This ensures service continuity. To configure the TC notification function for MSTP multi-process, perform the following procedure on the devices connected to access rings.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run stp process process-id

    The view of a created MSTP process is displayed.

  3. Run stp tc-notify process 0

    TC notification is enabled in the MSTP process.

    After the stp tc-notify process 0 command is run, the current MSTP process notifies the MSTIs in MSTP process 0 to update MAC entries and ARP entries after receiving a TC-BPDU. This prevents services from being interrupted.

  4. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-05-08

Document ID: EDOC1100004351

Views: 81342

Downloads: 274

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next