No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Ethernet Switching

CloudEngine 8800, 7800, 6800, and 5800 V200R003C00

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, MUX VLAN, Voice VLAN, VLAN mapping, QinQ, GVRP, VCMP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, and Layer 2 protocol transparent transmission.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Device to Transparently Transmit BPDUs

Configuring the Device to Transparently Transmit BPDUs

Context

When the backbone edge device connects to many user edge devices, to improve efficiency in forwarding BPDUs, the backbone edge device forwards BPDUs through the hardware. By default, a Layer 2 interface is not allowed to forward BPDUs when the device forwards BPDUs through the hardware. User edge devices connected to the backbone edge device cannot communicate. A Layer 2 interface can be enabled to forward BPDUs when the device forwards BPDUs through the hardware.

To ensure that tagged BPDUs are forwarded by a Layer 2 interface and untagged BPDUs are sent to the CPU for processing, enable the device to forward only tagged BPDUs through the hardware.

Procedure

  • Configure the device to transparently transmit all BPDUs.
    1. Run system-view

      The system view is displayed.

    2. Run interface interface-type interface-number

      The interface view is displayed.

    3. Run bpdu bridge enable

      A Layer 2 interface is enabled to forward BPDUs when the device forwards BPDUs through the hardware.

      By default, a Layer 2 interface is not allowed to forward BPDUs when the device forwards BPDUs through the hardware.
      NOTE:
      To use the hardware to forward BPDUs of a protocol such as STP, disable this protocol before running the bpdu bridge enable command.

    4. Run commit

      The configuration is committed.

  • Configure the device to transparently transmit tagged BPDUs. (Only the CE6870EI and CE6875EI support this function.)
    1. Run system-view

      The system view is displayed.

    2. Run bpdu bridge tagged-packet enable

      A Layer 2 interface is enabled to forward tagged BPDUs when the device forwards BPDUs through the hardware.

      By default, a Layer 2 interface is not allowed to forward tagged BPDUs when the device forwards BPDUs through the hardware.

      This command takes precedence over the bpdu bridge enable command.

    3. Run commit

      The configuration is committed.

Translation
Download
Updated: 2019-05-08

Document ID: EDOC1100004351

Views: 127202

Downloads: 296

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next