No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Ethernet Switching

CloudEngine 8800, 7800, 6800, and 5800 V200R003C00

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, MUX VLAN, Voice VLAN, VLAN mapping, QinQ, GVRP, VCMP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, and Layer 2 protocol transparent transmission.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring the Statistics About MSTP Topology Changes

Monitoring the Statistics About MSTP Topology Changes

The statistics about MSTP topology changes can be viewed. If the statistics increase, network flapping occurs.

Procedure

  • Run the display stp [ process process-id ] [ instance instance-id ] topology-change command to view the statistics about MSTP topology changes.

    In the case of a non-zero process, the stp process process-id command must be used to create a process before the display stp [ process process-id ] [ instance instance-id ] topology-change command is used.

  • Run the display stp [ process process-id ] [ instance instance-id ] [ interface interface-type interface-number | slot slot-id ] tc-bpdu statistics command to view the statistics about Topology Change/Topology Change Notification (TC/TCN) packets.

    In the case of a non-zero process, the stp process process-id command must be used to create a process before the display stp [ process process-id ] [ instance instance-id ] [ interface interface-type interface-number | slot slot-id ] tc-bpdu statistics command is used.

Translation
Download
Updated: 2019-05-08

Document ID: EDOC1100004351

Views: 126077

Downloads: 295

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next