No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Ethernet Switching

CloudEngine 8800, 7800, 6800, and 5800 V200R003C00

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, MUX VLAN, Voice VLAN, VLAN mapping, QinQ, GVRP, VCMP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, and Layer 2 protocol transparent transmission.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application of MQC-based Selective QinQ

Application of MQC-based Selective QinQ

As shown in Figure 6-6, video and data information is stored on the servers. A user device transmits IPTV and Internet access services, and connects to the server through the enterprise backbone network. SwitchB and SwitchC are edge devices of the enterprise backbone network. To save VLAN IDs on the enterprise backbone network, traffic needs to be transparently transmitted on the enterprise backbone network. In addition, IPTV services need to be transmitted only on the video server, Internet access services need to be transmitted only on the data server, and different services need to be differentiated. MQC-based Selective QinQ can be configured on SwitchB and SwitchC to meet the preceding requirements.

Figure 6-6 Networking of MQC-based selective QinQ

Updated: 2019-05-08

Document ID: EDOC1100004351

Views: 126923

Downloads: 296

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next