No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Ethernet Switching

CloudEngine 8800, 7800, 6800, and 5800 V200R003C00

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, MUX VLAN, Voice VLAN, VLAN mapping, QinQ, GVRP, VCMP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, and Layer 2 protocol transparent transmission.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting VBST Parameters That Affect VBST Convergence

Setting VBST Parameters That Affect VBST Convergence

After basic VBST functions are configured, VBST implements fast convergence using default parameters. To achieve better convergence, set parameters that affect VBST convergence.

Background

All steps in this configuration task are optional. You can perform the steps as needed.

Pre-configuration Tasks

Before configuring VBST parameters that affect VBST convergence, complete the following task:
Translation
Download
Updated: 2019-05-08

Document ID: EDOC1100004351

Views: 79910

Downloads: 274

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next