No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Ethernet Switching

CloudEngine 8800, 7800, 6800, and 5800 V200R003C00

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, MUX VLAN, Voice VLAN, VLAN mapping, QinQ, GVRP, VCMP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, and Layer 2 protocol transparent transmission.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing Statistics of VLAN Packets

Clearing Statistics of VLAN Packets

Context

If you want to collect traffic statistics for a specified time on an interface, you must first clear existing statistics on the interface.

Statistics about VLAN packets cannot be restored after you clear it. So, confirm the action before you use the command.

To clear the statistics of VLAN packets, run the following reset vlan statistics command in the user view:

Procedure

  • Run the reset vlan vlan-id statistics command to clear the packets of the specified VLAN statistics.
Translation
Download
Updated: 2019-05-08

Document ID: EDOC1100004351

Views: 116988

Downloads: 290

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next