No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Ethernet Switching

CloudEngine 8800, 7800, 6800, and 5800 V200R003C00

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, MUX VLAN, Voice VLAN, VLAN mapping, QinQ, GVRP, VCMP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, and Layer 2 protocol transparent transmission.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an Interface to Discard Incoming Tagged Packets

Configuring an Interface to Discard Incoming Tagged Packets


All packets sent from user devices are untagged, so user-side interfaces on a switch does not receive tagged packets, and the interface must be configured as an access interface. If a user connects a switch to a user-side interface without permission, the user-side interface may receive tagged packets. To prevent unauthorized access, you can configure the user-side interface to discard incoming tagged packets.

Only interfaces that are connected to user devices and do not receive tagged packets can be configured to discard incoming tagged packets.


  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The member interface view is displayed.

  3. Run port discard tagged-packet

    The interface is configured to discard incoming tagged packets.

    By default, an interface does not discard incoming tagged packets.

  4. Run commit

    The configuration is committed.

Updated: 2019-05-08

Document ID: EDOC1100004351

Views: 125234

Downloads: 295

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next