No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Ethernet Switching

CloudEngine 8800, 7800, 6800, and 5800 V200R003C00

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, MUX VLAN, Voice VLAN, VLAN mapping, QinQ, GVRP, VCMP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, and Layer 2 protocol transparent transmission.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Summary of STP/RSTP Configuration Tasks

Summary of STP/RSTP Configuration Tasks

Table 9-14 summarizes STP/RSTP configuration tasks.

Table 9-14 STP/RSTP configuration tasks
Scenario Description Task

Configuring basic STP/RSTP functions

Configure STP/RSTP on devices on a network to trim the network into a tree topology free from loops.

Configuring STP/RSTP

Setting STP parameters that affect the STP convergence speed

STP cannot implement rapid convergence. However, you can set STP parameters, including the network diameter, timeout interval, Hello timer value, Max Age timer value, and Forward Delay timer value to speed up convergence.

Configuring STP Parameters That Affect the STP Convergence Speed

Setting RSTP parameters that affect the RSTP convergence speed

RSTP supports link type and fast transition configuration on ports to implement rapid convergence.

Setting RSTP Parameters That Affect RSTP Convergence

Configuring RSTP protection functions

You can configure one or more RSTP protection functions on a Huawei device.

Configuring RSTP Protection Functions

Setting parameters for interoperation between Huawei and non-Huawei devices

To implement interoperation between a Huawei device and a non-Huawei device, select the fast transition mode based on the Proposal/Agreement mechanism of the non-Huawei device.

Configuring Interoperability Between Huawei and Non-Huawei Devices

Translation
Download
Updated: 2019-05-08

Document ID: EDOC1100004351

Views: 79115

Downloads: 274

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next