No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Ethernet Switching

CloudEngine 8800, 7800, 6800, and 5800 V200R003C00

This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, VLANs, MUX VLAN, Voice VLAN, VLAN mapping, QinQ, GVRP, VCMP, STP/RSTP/MSTP, VBST, SEP, RRPP, ERPS, LBDT, and Layer 2 protocol transparent transmission.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring MSTP Multi-Process

Configuring MSTP Multi-Process

On a network deployed with Layer 2 single-access rings and multi-access rings, configure multiple MSTP processes so that spanning trees of different processes are calculated independently and do not affect each other.

Pre-configuration Tasks

MSTP ensures that spanning trees in rings are calculated independently. After MSTP multi-process is enabled, each MSTP process can manage certain ports on a device. Each Layer 2 interface can be managed by multiple MSTP processes.

Before configuring MSTP multi-process, complete and activate the MST region configuration.

Translation
Download
Updated: 2019-05-08

Document ID: EDOC1100004351

Views: 125615

Downloads: 295

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next