No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Service

CloudEngine 8800, 7800, 6800, and 5800 V200R003C00

This document describes the configurations of IP Service, including IP address, ARP, DHCP, DNS, IP performance optimization, IPv6, DHCPv6, and IPv6 DNS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Static Domain Name Resolution

Configuring the Static Domain Name Resolution

Context

A static domain name resolution table is manually set up, describing the mappings between domain names and IP addresses. Some common domain names are added to the table. Static domain name resolution can be performed based on the static domain name resolution table. To obtain the IP address by resolving a domain name, the client searches the static domain name resolution table for the specified domain name. In this manner, the efficiency of domain name resolution is improved.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run ip host host-name ip-address [ vpn-instance vpn-instance-name ]

    Static DNS entries are configured.

    By default, no static DNS entries are configured.

    NOTE:

    Each host name can be mapped to only one IP address. When multiple IP addresses are mapped to a host name, only the latest configuration takes effect. If multiple host names need to be resolved, repeat step 2.

    You can configure a maximum of 1024 static DNS entries.

  3. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-05-08

Document ID: EDOC1100004354

Views: 69252

Downloads: 147

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next