No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Service

CloudEngine 8800, 7800, 6800, and 5800 V200R003C00

This document describes the configurations of IP Service, including IP address, ARP, DHCP, DNS, IP performance optimization, IPv6, DHCPv6, and IPv6 DNS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating an IPv6 Address Pool

Creating an IPv6 Address Pool

Context

A DHCPv6 server selects available IPv6 addresses from an address pool and assigns these IPv6 addresses to DHCPv6 clients. You need to create an IPv6 address pool and configure its attributes, including the network prefix, lifetime, and IPv6 addresses that cannot be automatically assigned to clients.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run dhcpv6 pool pool-name

    An IPv6 address pool is created and the IPv6 address pool view is displayed.

    By default, no IPv6 address pool is created.

  3. Run address prefix ipv6-prefix/ipv6-prefix-length [ life-time { valid-lifetime | infinite } { preferred-lifetime | infinite } ]

    The network prefix and lifetime are configured.

    By default, no network prefix or lifetime is configured.

  4. Run excluded-address start-ipv6-address [ to end-ipv6-address ]

    The IPv6 address of the interface connected to DHCPv6 clients and IPv6 addresses that cannot be automatically assigned to clients are added to the list of IPv6 addresses that cannot be assigned automatically.

    By default, all IPv6 addresses in the address pool can be automatically assigned to clients. If only one IPv6 address cannot be automatically assigned, specify the start-ipv6-address parameter only.

  5. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-05-08

Document ID: EDOC1100004354

Views: 69476

Downloads: 147

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next