No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Service

CloudEngine 8800, 7800, 6800, and 5800 V200R003C00

This document describes the configurations of IP Service, including IP address, ARP, DHCP, DNS, IP performance optimization, IPv6, DHCPv6, and IPv6 DNS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring Automatic Reclamation of Conflicting IP Addresses in an Address Pool

(Optional) Configuring Automatic Reclamation of Conflicting IP Addresses in an Address Pool

Context

When a DHCPv6 server assigns IPv6 addresses to clients, address conflict may occur because IPv6 addresses of some clients have been manually configured. In this case, the DHCP server considers these IP addresses as conflicting IP addresses, and assigns available IP addresses from the conflicting IP addresses to clients only after available IP addresses in the address pool are used up. To reclaim conflicting IP addresses promptly, you can set the interval for automatically reclaiming conflicting addresses on the device.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run dhcpv6 pool pool-name

    An IPv6 address pool is created and the IPv6 address pool view is displayed.

    By default, no IPv6 address pool is created.

  3. Run conflict-address expire-time expire-time

    The aging time for conflicting addresses in the IPv6 address pool is set.

    By default, the aging time of conflicting addresses is 172800s (2 days).

  4. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-05-08

Document ID: EDOC1100004354

Views: 68447

Downloads: 147

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next