No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - IP Service

CloudEngine 8800, 7800, 6800, and 5800 V200R003C00

This document describes the configurations of IP Service, including IP address, ARP, DHCP, DNS, IP performance optimization, IPv6, DHCPv6, and IPv6 DNS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a DHCPv6 Relay Agent

Configuring a DHCPv6 Relay Agent

A DHCPv6 relay agent enables the DHCPv6 client and server on different links to exchange DHCPv6 messages.

Pre-configuration Tasks

Before configuring the DHCPv6 relay agent, complete the following tasks:

  • Configuring the peer DHCPv6 server or DHCPv6 PD server

  • Configuring a route from the switch to the DHCPv6 server or DHCPv6 PD server

Updated: 2019-05-08

Document ID: EDOC1100004354

Views: 72131

Downloads: 147

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next