No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Service

CloudEngine 8800, 7800, 6800, and 5800 V200R003C00

This document describes the configurations of IP Service, including IP address, ARP, DHCP, DNS, IP performance optimization, IPv6, DHCPv6, and IPv6 DNS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
DHCPv6 Server Allowing DHCPv6 Clients to Release Addresses

DHCPv6 Server Allowing DHCPv6 Clients to Release Addresses

A DHCPv6 client needs to release the current IPv6 address when it goes offline. The following describes how a DHCPv6 server allows a DHCPv6 client to release an IPv6 address when no DHCPv6 relay agent exists on the network. If a DHCPv6 relay agent exists, the only difference is that the DHCPv6 relay agent processes DHCPv6 messages. For details, see DHCPv6 Server Allocating Addresses and Network Configuration Parameters to New Clients.

Figure 8-12 A DHCPv6 server allows DHCPv6 clients to release addresses

  1. When a DHCPv6 client does not need to use the current IPv6 address, the DHCPv6 client sends a unicast Release message to the DHCPv6 server that allocates the IPv6 address. The Release message carries the DHCPv6 server's DUID, the DHCPv6 client's DUID, and the IPv6 address that needs to be released.
  2. After receiving the Release message, the DHCPv6 server checks the validity of the IPv6 address. If the check passes, the DHCPv6 server reclaims the IPv6 address and sends a unicast Reply message to the DHCPv6 client.
  3. After the DHCPv6 client receives the Reply message, the IPv6 address is released.
Translation
Download
Updated: 2019-05-08

Document ID: EDOC1100004354

Views: 69478

Downloads: 147

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next