No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Service

CloudEngine 8800, 7800, 6800, and 5800 V200R003C00

This document describes the configurations of IP Service, including IP address, ARP, DHCP, DNS, IP performance optimization, IPv6, DHCPv6, and IPv6 DNS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing IPv6 Statistics

Clearing IPv6 Statistics

Context

IPv6 statistics cannot be restored after being cleared. Therefore, exercise caution before clearing IPv6 statistics.

Procedure

  • Run the reset rawip ipv6 statistics command in the user view to clear all Raw IPv6 packet statistics.
  • Run the reset ipv6 statistics command in the user view to clear IPv6 traffic statistics.
  • Run the reset tcp ipv6 statistics command in the user view to clear TCP6 statistics.
  • Run the reset udp ipv6 statistics command in the user view to clear UDP6 statistics.
  • Run the reset ipv6 pathmtu [ vpn-instance vpn-instance-name ] dynamic command in the user view to clear dynamic PMTU entries.
  • Run the reset ipv6 neighbors { dynamic | vlan vlan-id [ interface-type interface-number ] | interface-type interface-number } command in the user view to clear dynamic IPv6 neighbor entries.
  • Run the reset ipv6 nd security nonce interface-type interface-number command in the user view to clear the Nonce value of an IPv6 SEND message on a specified interface.
  • Run the reset ipv6 nd security statistics interface-type interface-number command in the user view to clear statistics on IPv6 SEND messages on a specified interface.
  • Run the reset ipv6 nd security timestamp interface-type interface-number command in the user view to clear the timestamp of an IPv6 SEND message on a specified interface.
Translation
Download
Updated: 2019-05-08

Document ID: EDOC1100004354

Views: 69223

Downloads: 147

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next