No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Reliability

CloudEngine 8800, 7800, 6800, and 5800 V200R003C00

This document describes the configurations of Reliability, including BFD Configuration, VRRP Configuration, DLDP Configuration, Smart Link and Monitor Link Configuration, EFM Configuration, and CFM Configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Basic Concepts of VRRP

Basic Concepts of VRRP

In Figure 3-1, HostA is dual-homed to SwitchA and SwitchB through the switch. SwitchA and SwitchB constitute a VRRP group to implement link redundancy.

Figure 3-1 VRRP group

In Figure 3-1, VRRP involves the following entities:

  • VRRP router: device running VRRP. There may belong to one or more virtual routers. SwitchA and SwitchB are VRRP routers.

  • Virtual router: VRRP group consisting of one master and one or more backups. The VRRP group's virtual IP address is used as the default gateway address on a LAN. SwitchA and SwitchB combine to form a virtual router.

  • Virtual router master: VRRP device that forwards packets. SwitchA is the virtual router master.

  • Virtual router backup: a group of VRRP devices that do not forward packets. When the master is faulty, a backup with the highest priority becomes the master. SwitchB is the virtual router backup.

  • VRID: virtual router ID. The VRID of the virtual router composed of SwitchA and SwitchB is 1.

  • Virtual IP address: IP address of a virtual router. A virtual router can be assigned one or more virtual IP addresses that are configurable. The virtual IP address of the virtual router composed of SwitchA and SwitchB is

  • IP address owner: VRRP device that uses an IP address of a virtual router as the actual interface address. If an IP address owner is available, it usually functions as the virtual router master. The interface address of SwitchA and the IP address of the virtual router are both, making SwitchA the IP address owner.

  • Virtual MAC address: MAC address that is generated by the virtual router based on the VRID. The virtual router sends ARP Reply packets carrying the virtual MAC address but not the interface MAC address. The VRID of the virtual router composed of SwitchA and SwitchB is 1, so the MAC address of the VRRP group is 00-00-5E-00-01-01.

Updated: 2019-05-08

Document ID: EDOC1100004359

Views: 66659

Downloads: 129

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next