No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Reliability

CloudEngine 8800, 7800, 6800, and 5800 V200R003C00

This document describes the configurations of Reliability, including BFD Configuration, VRRP Configuration, DLDP Configuration, Smart Link and Monitor Link Configuration, EFM Configuration, and CFM Configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Creating a Default MD

(Optional) Creating a Default MD

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run cfm default md [ level level ]

    A default MD is created and the default MD view is displayed.

    By default, the default MD is not created on the device. The default MD is created at level 7 by default. Level 7 is the highest level.

    You can create only one default MD on each device.

    NOTE:

    The default MD must have a higher level than all MDs that MEPs configured on the local device belong to. In addition, the default MD must have the same level as a high-level MD. The default MD is used to transmit high-level CCMs and create MIPs to send LTR messages.

  3. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-05-08

Document ID: EDOC1100004359

Views: 65537

Downloads: 128

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next