No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Reliability

CloudEngine 8800, 7800, 6800, and 5800 V200R003C00

This document describes the configurations of Reliability, including BFD Configuration, VRRP Configuration, DLDP Configuration, Smart Link and Monitor Link Configuration, EFM Configuration, and CFM Configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Smart Link and Monitor Link Configuration

Smart Link and Monitor Link Configuration

Smart Link is a link backup feature that provides a fast link switchover mechanism on dual-homed networks to improve reliability. Monitor Link is an interface association mechanism used to monitor the uplink interface state. If the state of the uplink interface switches between Up and Down, Monitor Link requests the associated downlink interfaces to switch their states. In this case, the topology protocol on the downstream device triggers an active/standby switchover.

Translation
Download
Updated: 2019-05-08

Document ID: EDOC1100004359

Views: 71064

Downloads: 131

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next