No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Reliability

CloudEngine 8800, 7800, 6800, and 5800 V200R003C00

This document describes the configurations of Reliability, including BFD Configuration, VRRP Configuration, DLDP Configuration, Smart Link and Monitor Link Configuration, EFM Configuration, and CFM Configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring the Running Status of CFM

Monitoring the Running Status of CFM


To check the running status of CFM during routine maintenance, run the following display commands in any view.


  • Run the display oam global configuration command to check the global configuration of Ethernet OAM.
  • Run the display cfm mep [ md md-name [ ma ma-name [ mep-id mep-id ] ] ] command to check MEP information.
  • Run the display cfm mip [ interface interface-type interface-number | level level ] command to check MIP information.
  • Run the display cfm remote-mep [ md md-name [ ma ma-name ] ] [ cfm-state { up | down | disable } ] command to check RMEP information.
Updated: 2019-05-08

Document ID: EDOC1100004359

Views: 66977

Downloads: 129

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next