No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei SAP HANA Appliance Single Node Installation Guide (KunLun 9008 and 9016) 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Overview

This document describes how to install and configure the SAP HANA appliance on a KunLun server in single node mode.

By reading this document, you can learn the SAP HANA single node solution and installation planning, OS installation and configuration, external storage configuration, PCIe SSD configuration, and SAP HANA database installation.

OSs include the following:

  • SUSE Linux Enterprise Server (SLES) 12.1/12.2/12.3
  • Red Hat Enterprise Linux (RHEL) 7.2/7.3/7.4

SAP HANA databases include the following:

  • SAP HANA Database 1.0
  • SAP HANA Database 2.0

Intended Audience

This document is intended for:

  • Technical support engineers
  • Maintenance engineers
  • Users

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.

Issue 10 (2019-08-26)

This issue is the tenth official release. Updated Responsibility Matrix and Problem Handling Process.

Issue 09 (2019-06-13)

This issue is the ninth official release:

  • Deleted the RHEL for SAP lifecycle model diagram from the RHEL for SAP Lifecycle.
  • Deleted the diagrams of the OS and SAP HANA compatibility.

Issue 08 (2019-05-10)

This issue is the eighth official release. Updated OS Lifecycle.

Issue 07 (2019-03-28)

This issue is the seventh official release. Updated Problem Handling Process.

Issue 06 (2018-12-26)

This issue is the sixth official release. Updated Adjusting HANA 1.0 Database Parameters.

Issue 05 (2018-09-25)

This issue is the fifth official release. Added SLES for SAP Lifecycle.

Issue 04 (2018-08-10)

This issue is the fourth official release. Added Registering and Activating the OS.

Issue 03 (2018-07-06)

This issue is the third official release. The contents of SLES 12.3 and RHEL 7.3/7.4 are added.

Issue 02 (2018-03-23)

This issue is the second official release. Unclear OS installation screenshots are updated.

Issue 01 (2018-02-12)

This issue is the first official release.

Translation
Download
Updated: 2019-08-27

Document ID: EDOC1100004728

Views: 46282

Downloads: 141

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next