No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei SAP HANA Appliance Single Node Installation Guide (KunLun 9008 and 9016) 08

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the kdump File

Configuring the kdump File

  1. Run the cd /etc/sysconfig command to go to the /etc/sysconfig directory.

    # cd /etc/sysconfig

  2. Modify the kdump file and change the value of the KDUMP_CPUS value from 1 to the number of current CPU cores. For example, if the number of current CPU cores is 18, change the value of KDUMP_CPUS to 18.

    # vi kdump

  1. Press Esc and run :wq to save the configuration and exit.
  2. Restart the server for the configuration to take effect.

    NOTE:

    After you configure the kdump service, you need to restart the server for the configuration to take effect. To avoid repeatedly restarting the server, it is recommended that you restart the server after you complete all configurations in this chapter.

Translation
Download
Updated: 2019-05-14

Document ID: EDOC1100004728

Views: 31630

Downloads: 116

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next