No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei SAP HANA Appliance Single Node Installation Guide (KunLun 9008 and 9016) 08

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Preparing for the Installation

Preparing for the Installation

  1. Log in to the CMC WebUI and check that no hardware alarm exists.
  2. If PCIe SSD cards are installed, run the cat /proc/mdstat command to check the SoftRAID status. (The information in the following figure shows that two SSD cards are in RAID 1).

  3. Go to official SAP website to download the latest SAP HANA database software (for example, IMDB_SERVER100_122_5-10009569.SAR) and SAP decompression tool (SAPCAR_617-80000935_Linux_64bit.EXE).
  4. Double-click to open WinSCP (free software, available at http://winscp.net/download/winscp515.zip). Enter the server IP address, user name (root), and password (specified during the OS installation) to log in to the server. Then copy the SAP HANA database software and SAP decompression tool to the server.

    NOTE:

    If the downloaded database file (the decompressed file name is HDB_SERVER_LINUX_X86_64) has already been decompressed on the local host, directly upload it to the server.

  5. Plan database installation parameters.

    Parameter

    Description

    HANA System ID

    The HANA system ID is a string of three characters, including letters and digits. The first character must be a letter. An example ID is S00.

    Instance Number

    A HANA instance number, for example, 00, is used to identify a HANA system from others in a server.

    Database Mode

    • single_container: single-tenant mode
    • multiple_containers: multi-tenant mode
    NOTE:

    This option is unavailable during the installation of database 2.0. The multi-tenant mode is used by default.

    System Usage

    1. Production: production environment
    2. test: test environment
    3. development: development environment
    4. custom: customized database

    System Password

    Database password.

    Restrict maximum memory

    If multiple database instances are to be installed on a server, you need to specify the maximum memory size for each instance (the memory size can also be changed in the configuration file after the instances are installed). For example, you can restrict the maximum memory size to 256 GB.

Translation
Download
Updated: 2019-05-14

Document ID: EDOC1100004728

Views: 32051

Downloads: 118

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next