No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Huawei SAP HANA Appliance Single Node Installation Guide (KunLun 9008 and 9016) 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the system.conf File

Configuring the system.conf File

  1. Run the cd /etc/systemd command to go to the /etc/systemd directory.

    # cd /etc/systemd

  2. Open the system.conf file and change the process waiting time to 900s.

    vi system.conf

  1. Press Esc and run :wq to save the configuration and exit.
  2. Restart the server for the configuration to take effect.


    After you configure the systemd service, you need to restart the server for the configuration to take effect. To avoid repeatedly restarting the server, it is recommended that you restart the server after you complete all configurations in this chapter.

Updated: 2019-08-27

Document ID: EDOC1100004728

Views: 46625

Downloads: 145

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next