No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei SAP HANA Appliance Single Node Installation Guide (KunLun 9008 and 9016) 09

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing Patch Packages and Mounting an Image File

Installing Patch Packages and Mounting an Image File

  1. Use a browser to log in to the CMC WebUI of the server, choose Partition Management > KPAR, click Remote Virtual Console, and select Shared Mode.

  2. Click Image File, click Browse, select the image file, and click Connect.

  1. Run the mount /dev/sr0 /mnt command to mount the virtual DVD-ROM drive.

    [root@hw00001]# mount /dev/sr0 /mnt

  1. Run the cd /mnt command to go to the virtual DVD-ROM directory.

    cd /mnt

  1. Run the ./kunlun_prepare_hana_host.sh command to execute the script.

    ./kunlun_prepare_hana_host.sh
    NOTE:

    The script contains all necessary SAP HANA patch packages, HA installation packages, UUID patch packages, and OS parameter settings. After performing this step, you can skip the procedure in section 5.4.8 "Installing Patch Packages and Configuring Parameters."

Translation
Download
Updated: 2019-06-17

Document ID: EDOC1100004728

Views: 36049

Downloads: 122

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next