No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei SAP HANA Appliance Single Node Installation Guide (KunLun 9008 and 9016) 09

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Driver Installation

Verifying the Driver Installation

You can perform the procedure described in this section on the CMC WebUI KVM or on PuTTY after logging in to the server. This section describes how to perform the procedure on PuTTY.

NOTE:

For ES3000 V3 NVMe SSD cards, the driver delivered with the OS is recommended. For ES3000 V2 SSD cards, the Huawei ES3000 driver is recommended.

  1. Log in to the server as the root user.
  2. Run the fdisk -l command to check the capacities of the NVMe SSDs (nvme0n1 and nvme1n1).
Translation
Download
Updated: 2019-06-17

Document ID: EDOC1100004728

Views: 36997

Downloads: 122

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next