No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Huawei SAP HANA Appliance Single Node Installation Guide (KunLun 9008 and 9016) 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the after.local File

Configuring the after.local File

  1. Run the vi /etc/init.d/after.local command.
  2. Press i to go to the edit mode and add the following information to the file:

    echo 0 > /sys/kernel/mm/ksm/run
    echo 0 > /proc/sys/vm/pagecache_limit_mb

  3. Press Esc and run :wq to save the configuration and exit.
Updated: 2019-08-27

Document ID: EDOC1100004728

Views: 46423

Downloads: 141

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next