No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei SAP HANA Appliance Single Node Installation Guide (KunLun 9008 and 9016) 09

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Partition Planning (SLES Installation Disk)

Partition Planning (SLES Installation Disk)

Two built-in 600 GB SAS HDDs are configured as a RAID 1 array for installing the OS. The following table lists the partition planning for SLES installation.

Table 3-5 Partition planning for SLES installation

Partition Name

File System Type

Partition Size

Source

swap

swap

20 GB

LVM (2 x 600 GB, RAID 1)

/boot/efi

FAT

1 GB

Local storage (2 x 600 GB, RAID 1)

/usr/sap

Ext4

200 GB

LVM (2 x 600 GB, RAID 1)

/

Ext4

Remaining space

LVM (2 x 600 GB, RAID 1)

Translation
Download
Updated: 2019-06-17

Document ID: EDOC1100004728

Views: 37097

Downloads: 122

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next