No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei SAP HANA Appliance Single Node Installation Guide (KunLun 9008 and 9016) 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Network Planning

Network Planning

Table 3-2 Server data planning

Item

Data

CMC management port

CMC floating IP address: 192.168.19.130/24

Active CMC IP address: 192.168.19.128/24

Standby CMC IP address: 192.168.19.129/24

NOTE:

The active and standby CMC IP addresses are optional. You can configure only the floating IP address if the live network has only one IP address.

OS management port

192.168.19.150/24

Bonded network port (10GE)

10.5.2.10/24

Host name

hw00001

Table 3-3 Storage data planning

Item

Data

Management network

Active controller: 128.5.180.31/24

Standby controller: 128.5.180.32/24

Translation
Download
Updated: 2019-08-27

Document ID: EDOC1100004728

Views: 46426

Downloads: 141

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next