Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Preparing Tools
Prepare tools required for installation and electrical connections.
Tool |
Model |
Function |
|---|---|---|
Hammer drill |
Ф6 drill bit |
Drills holes in the wall when the SmartLogger is wall-mounted. |
Diagonal pliers |
- |
Cuts and tighten cable ties. |
Wire stripper |
- |
Peels cable jackets. |
Rubber mallet |
- |
Hammers expansion bolts into holes. |
Guarded blade utility knife |
- |
Removes package. |
Cable cutter |
- |
Cuts cables. |
Vacuum cleaner |
- |
Cleans up dust after holes are drilled. |
Marker |
Diameter: ≤ 10 mm |
Marks signs. |
Measuring tape |
- |
Measures distance |
Plumb line |
- |
Ensures that the screws are perpendicular to the wall. |
Safety goggles |
- |
Protect an operator's eyes during hole drilling. |
Anti-dust respirator |
- |
Protects an operator from dust inhalation during hole drilling. |
