Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Precautions
This topic describes the precautions for installing and operating the SmartLogger.
Personnel Requirements
- Only qualified and trained electrical technicians are allowed to install and operate the SmartLogger.
- Operation personnel should understand the composition and working principles of the PV grid-tied power generating system and local regulations.
Read this document thoroughly before
operations. Huawei shall not be liable for any consequence caused
by violation of the storage, transportation, installation, and operation
regulations specified in this document.
Identification Protection
- The signs on the SmartLogger shell specify important information about secure operations. Do not damage the signs.
- The nameplate attached to the bottom of the SmartLogger lists the SmartLogger parameters. Do not damage the nameplate.
Installation
- Before installing the SmartLogger, ensure that it is not connected or energized.
- Install the SmartLogger in well-ventilated environments to ensure system performance.
- Ensure that the heat dissipation holes of the SmartLogger are not blocked.
- Do not move the components inside the shelf except for the wiring terminals at the bottom.
Operation
Strictly comply with the safety precautions in this document and associated documents to operate the SmartLogger.
When operating the SmartLogger, follow local laws and regulations.
Maintenance and Replacement
- A faulty SmartLogger requires overall maintenance. Contact the dealer if any fault occurs in the SmartLogger shelf.
- Maintain the SmartLogger after you get familiar with this document and tools and testing equipment are available.
- When maintaining the SmartLogger, wear ESD gloves and comply with ESD precautions.