Setting the Currency and Currency Factor

Procedure

• The following table describes the procedure for setting the currency and currency factor. The parameter values in the following figures are for reference only.

  LCD	Operation Procedure
  	1. On the default screen, press to enter the main menu.
  	2. Choose and press .
  	3.Because of permission restriction, log in as Common User, or Advanced User. NOTE: After passing the permission validation, the system keeps the authentication information for 30 seconds. If you exit from the Settings page and log in again within 30 seconds, no authentication is required.
  Here use the pages displayed when you log in to the SmartLogger as Advanced User.	4. Choose User Param., and press . Perform step 5 to set the currency. Perform step 6 to set the currency factor.
  	5. Set the currency. a. Select Currency by pressing , and press . b. Select a currency, and press .
  	6. Set the currency factor. NOTICE: Set the currency before you set the currency factor. The currency factor is the electricity price per kWh, which is used to calculate the energy yield revenue. a. Select Electricity price/kWh by pressing , and then press . b. Set the currency factor by pressing or , and then press .