Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Reactive Power Fix Control
Parameter |
Description |
|---|---|
If the PV array is required to generate constant reactive power at a specified time, set this parameter to Reactive power fix control. |
|
If the inverter is required to run with specified maximum power in certain periods of a day, add setting records based on site requirements. When multiple time points are set, the inverter will run with the maximum power specified for the time point that is earlier than and the closest to the current system time. For example, if you add 00:00:00 and 12:00:00 on the WebUI and the current system current is 14:30:00, the inverter will run with the maximum power specified for 12:00:00. |
|