Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting DL/T645 Power Meter Parameters
You can set DL/T645 power meter parameters on the LCD.
Procedure
- The following table describes the procedure for setting DL/T645 power meter parameters. The parameter values in the following figures are for reference only.
LCD
Operation Procedure
1. On the default screen, press
to enter the main menu.
2. Select
and press
.
3. Choose Power Meter and press.
NOTE:Power Meter (3-1) on the left indicates that the power meter connects to port 3 of the SmartLogger and its RS485 communications address is 1.
The device status is displayed behind the device name.
4. Choose and press
.
5. Because of permission restriction, log in as Advanced User. 6. Choose and press
.
