Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
User Parameters
Setting the Date and Time
Because of permission restriction, log in as Common User or Advanced User. Choose to access the target page.
Figure 7-37 Setting the date and time
![]()
- The Local time zone parameter is unavailable for zones without DST.
- After Date&Time is set, the date and time of all the inverters connected to SmartLogger are updated accordingly. Ensure that the settings are correct.
- Modification of Date&Time may affect the recording of energy yield and performance data. Therefore, do not change the time zone or system time arbitrarily.
Setting Plant Information
After you set plant information, a plant configuration file can be generated. You can upload this file to a third-party hosting website to implement remote monitoring.
Because of permission restriction, log in as Common User or Advanced User. Choose to access the target page.
Figure 7-38 Setting plant information
![]()
When setting plant information,
you cannot successfully enter any character such as <>:,`'?()#&\$|%+;~^"
in the English half-width status.
