Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Electrical Connections
This topic describes how to connect the SmartLogger to the inverters, environmental monitoring instrument, and PCs.
- Connection Description
- Connecting the PE Cable for the RS485 Signal SPD
- Connecting the RS485 Signal SPD
- Connecting the SmartLogger to Inverters
This topic describes how to connect the SmartLogger to inverters. - Connecting to an EMI
- Connecting the SmartLogger to a Power Meter
This topic describes how to connect the SmartLogger to a power meter. - Connecting to a PLC (MBUS)
This topic describes how to connect the SmartLogger to a PLC (MBUS). - Connecting an Ethernet Network Cable
- Connecting to a PID
This section describes how to connect the SmartLogger to a PID. - Connecting the SmartLogger to a Ripple Control Receiver
This topic describes how to connect the SmartLogger to a ripple control receiver.