Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing Historical PID Information
You can clear the active alarms and historical alarms stored on the PID module over the LCD.
Procedure
- The following table describes the procedure for clearing historical PID information. The parameter values in the following figures are for reference only.
LCD
Operation Procedure
1. On the default screen, press
to enter the main menu.
2. Choose
and press
.
3. Select a PID and pressNOTE:PID (3-1) in the left figure indicates that the PID is connected to the Port 3 of the SmartLogger, and its RS485 communications address is 1.
4. Choose Settings and press
.
5. Because of permission restriction, log in as Advanced User. 6. Choose and press
.
