Querying Alarm Records
This topic describes how to query active and historical alarms for the SmartLogger and the connected inverters and how to set the alarm record sort mode on the monitoring panel.
Procedure
- The following table describes the procedure for querying active and historical alarms and setting the alarm record sort mode. The parameter values in the figures are for reference only.
LCD
Operation Procedure
1. On the default screen, press
to enter the main menu.
2. Choose
and press
.
3. Press
, choose the appropriate menu, and press
.
- Perform step 4 and step 5 to view active alarms.
- Perform step 6 and step 7 to view historical alarms.
- Perform step 8 to set the alarm sort mode.
4. On the Active Alarms screen, select the target device name and press
to view all the active alarms for this device.
5. Select one of the alarm records by pressing
or
, and view the alarm details by pressing
.
NOTE:- For details about the alarm list of the SmartLogger1000, see Alarms.
- For details about the alarm list of the SUN2000, see the Troubleshooting in the SUN2000 series user manual.
6. On the Alarm History screen, select the target device name and press
to view all the historical alarms for this device.
7. Select one of the historical alarms by pressing
or
and view the alarm details by pressing
.
NOTE:- For details about the alarm list of the SmartLogger1000, see Alarms.
- For details about the alarm list of the SUN2000, see the Troubleshooting in the SUN2000 series user manual.
8. On the Sort By page, you can select the way of sorting alarms.
