Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying Custom Device Information
This topic describes how to query the running information and version of a custom device connected to the SmartLogger.
Procedure
- The following table describes the procedure for viewing
the information about a custom device. The parameter values in the
figures are for reference only.
LCD
Operation Procedure
1. On the default screen, press
to enter the main menu.
2. Select
and press
.
3. Select a custom device and press.
NOTE:Custom Device1 (2-1) in the left figure indicates that the custom device is connected to the Port 2 of the SmartLogger, and its RS485 communications address is 1.
